Furnaces & Presses - Oil & Gas Equipment

Presses

The following products are made in Europe:

Hipro Master

 ECCENTRIC kinematic
Dynamic balance and plungers
Pressing force from 1.000 to 3.000 kN
Pressing Table up to 2 meters
2 connecting rods
Working speed up to 300 SPM

Power Master

 ECCENTRIC kinematic
Pressing force from 1.000 to 20.000 kN
Pressing Table up to 7 meters
1-2-4 connecting rods
Fixed or adjustable strokes up to 600 mm
Working speed up to 200 SPM

Motion Master

 DOUBLE KNUCKLE-JOINT
kinematic MODIFIED for SLOW DOWN
Pressing force from 1.000 to 30.000 kN
PPress table up to 7 meters
1-2-4 connecting rods
Fixed or adjustable strokes up to 800 mm
Working speed up to 200 SPM

Servo Master

 ECCENTRIC or KNUCKLE-JOINT
kinematic with SERVO motors.
Flexible press cycle programmable
in conventional mode or pendulum.
Pressing force from 2.000 to 30.000 kN
Press table up to 7 meters
1-2-4 connecting rods
Fixed or adjustable strokes up to 800 mm
Working speed up to 200 SPM

Furnaces

The following products are made in Europe:

Aluminum T6 Heat Treatment Line

Furnaces - Aluminum 16 Heat Treatment Line

Automatic heat treatment line consisting of:
1 X Load bench
1 X Solution furnace
1 X Quenching unit (water quench or in alternative Air Quench)
1 X Loading/unloading transfer stations
1 X Ageing oven
1 X Unloading bench
The plant is managed automatically by the control system, which enables the plant to run
without constant supervision by the operator.

Automatic Plant with 6-Ton Loader for Solubilization

Furnaces - Automatic Plant with 6-Ton Loader for Solubilization

Automatic heat treatment line consisting of:
1 X Bell furnace for solubilization.
1 X Tank for quenching.
2 X Charging/discharging stations
1 X automatic loader. 6-ton capacity.
Management system
The plant is managed automatically by the control system, which enables the plant to run
without constant supervision by the operator.

Automatic Plant with 20-Ton Loader

Furnaces - Automatic Plant with 20-Ton Loader

Automatic heat treatment line consisting of:
6 X Chamber furnaces
2 X Cooling chambers
6 X Loading/unloading stations
2 X Loading/unloading transfer stations
1 X Three-axis + rotation automatic loader.
20-Ton load capacity
Maximum size of the load:
Length = 3.400 mm
Height = 3.800 mm
Width = 2.000 mm
The plant is managed automatically by the control system, which enables the plant to run
without constant supervision by the operator.

Note: Also available in 15-Ton and 5-Ton.

Bell Furnace with two Bases for Heat Treatment

Furnaces - Bell Furnace with two Bases for Heat Treatment

Maximum size of the load:
Length = 10000 mm
Width = 3000 mm.
Height = 3000 mm.
Temperature:
Working = from 600°C to 1150°C
Max = 1200°C
Weight of the load = 50 tons.
Controlled cooling
It is made by air ventilation that releases the ambient temperature air taken from inside the
warehouse by 2 pipelines, conducted at the same level of burners and accompanied by 20
motorized valves operated by the PLC
Cooling temperature from 1000 ° C to 550 ° C in 1.5 h

Bogie Hearth Furnace for forging with heat exchanger

Furnaces - Bogie Hearth Furnace for forging with heat exchanger

Chamber dimensions:
Length = 6000 mm.
Width = 3200 mm.
Height =1600 mm
Maximum weight load = 50.000 kg.
Température : 1300 ° C
Maximum temperature increase gradient:
From 20°C to 1100°C = 80° C/h
From 1100°C to 1250°C = 50° C/h
Installed heating power = 2.500.000 kcal/h.
Consumption = 40-60mc/ton

Bogie Hearth Furnace for forging with regenerative burners

Furnaces - Bogie Hearth Furnace for forging with regenerative burners

Bogie size:
Length = 13.000 mm.
Width = 5.400 mm.
Height = 2.500 mm. (max height of load = 1500mm)
Max load height: 2.500mm
Max load weight : 360 Ton
Temperature: 1300°C
Combustion system: 5 couple of regenerative burners low NOx
Installed heating power = 11.800 kW.

Bogie Hearth Furnace for Heat Treatment

Furnaces - Bogie Hearth Furnace for Heat Treatment

Chamber sizes:
Length = 8000 mm.
Width = 5000 mm.
Height = 3500 mm
Max load weight: 30 Ton
Temperature:
Operating = from 600°C to 1070°C
Maximum = 1100°C
Maximum temperature increase gradient:
From 20°C to 800° C = 80 °C/h
From 800°C to 1070°C = 60 °C/h
Installed heating power = 4.128.000 kcal/h.

Chamber Furnace for Aluminum Ageing

Furnaces - Chamber Furnace for Aluminum Ageing

Chamber sizes:
Length = 6,200 mm.
Width = 2.100 mm.
Height = 1.800 mm.
Max load weight : 12 Ton
Temperature: from 150°C to 250°C
Temperature uniformity: ± 3°C @ 225 °C
Combustion system: 4 couple of high speed burners installed in special flame diffusors
Installed heating power = 1.000.000 kcal/h.

Chamber Furnace for forging with regenerative Burners

Furnaces - Chamber Furnace for forging with regenerative burners

Chamber sizes:
Length = 2.600 mm.
Width = 4.000 mm.
Height = 2.500 mm. (max height of load = 1500mm)
Max load weight : 30 Ton
Temperature: 1300°C
Combustion system: 2 couple of regenerative burners low NOx
Installed heating power = 1.600.000 kcal/h.

Hardening Plant

Furnaces - Hardening Plant

The hardening plant consists of:
N. 1 Austenitizing bell furnace with self-recuperative burners.
N. 1 Tank for quenching in water and polymer, capacity of 250mc complete with agitators
and cooling circuit.
Maximum size of the load:
Length = 12500 mm
Height = 2000 mm
Width = 2000 mm.
Maximum load weight: 100 Ton
Temperature:
Operating = from 600°C to 1150°C
Maximum = 1200°C

Rotary Hearth Furnace in a controlled atmoshphere

Furnaces - Rotary Hearth Furnace in a controlled atmoshphere

Heating type: radiant tube with Self-Recuperative Burners
20 pieces per hour
1.000 kg/h
Hearth diameter: 5600mm
Max Temperature: 950°C
Basic atmosphere: with endogas, nitrogen (adding: CH4, C3H8, NH3)
High speed trolley for loading and unloading.
24 fixed stations in chamber

Bogie Hearth Furnace for forging with regenerative burners

Furnaces - Rotary Hearth Furnaces for forging with regenerative burners

Chamber dimension:
External diameter: 7.400 mm
Internal diameter: 4.000 mm
Height: 1.500 mm
Production: 8000 kg/h
Temperature: 1300°C
Combustion system: 4 couple of regenerative burners low NOx

Rotary Hearth Furnace for forging with Heat Exchanger

Furnaces -Rotary Hearth Furnace for forging with heat exchanger

Chamber dimension:
External diameter: 4.000 mm
Internal diameter: 2.000 mm
Height: 1.000 mm
Production: 2000 kg/h
Temperature: 1300°C
Burner type: radiant flame LOW NOx
Accessories:
High-efficiency heat exchanger GADDA for preheating combustion air up to 550 °C

© 2015 Oil & Gas Equipment